Woodworking always not safe but if you follow some basic guideline and key points about woodworking safety rules it would be very enjoyable. All of the rules are very common that one can easily maintain it, however, If anyone failure to follow these rules will be increase the chance of serious injury in the working period generally when using the tools in the lathes. In the working time should follow all the rules and specially, should commit about these 10 rules and try to your habit for safer and much more dedicated and exciting.
Wear Safety Equipment During the working Time
Wearing appropriate safety equipment during the woodworking time is the first and most vital rule. In the working hour, protection is important for some very noisy tools such as surface planers, routers and latex gloves may be necessary when applying finishes, there is no time in the wood shop that you should be without your safety glasses. You must wear it when enter in the wood shop and after finishing the work just leave it in the shop.
Wear Appropriate Clothing During the working Time
Appropriate Clothing during the working Time is the second most important rule. Whenever you working in the wood shop always try to remember avoid loose-fitting clothing, as you wouldn’t want any of your attire to become entangled in a saw blade or cutting head. Clothes those are comfortable for the environment in which you’re working always wearing these types because this will protect your body from any wayward wood chips that might result from cutting.
Before start your work, keep in mind that you should remove any dangling jewelry such as neck chains or bracelets. As far we know it can hamper in your work and break concentration.
Drugs and Alcohol should not allow in the Shop
Intoxicating substances like drugs or alcohol and woodworking are always a harmful mix. Try to leave the shop whenever you are in drank because it can hamper in your work. In general, in the weekend a woodworker want to have a beer with him during the project, time in the shop or industry or personal workshop which is very harmful to their work. In that types of position, they should avoid it. For group project, the leader should follow everything because any member could be drank and take beer with them. So, leader should follow it.
Disconnect The Power Cable Before Blade Changes
When you need to change a blade or bit on a power tools, should always disconnect the electricity to the power cable and even beginning the blade change otherwise in this process you can lost fingers or injured it. We know it’s a simple rule but I think it is very important one.
By Using One Extension Cord
By using heavy duty extension cord can have lots of advantages in woodworking. You can use only one per tool it can lots of benefits. Use one heavy-duty extension cord. Not one per tool, but one total. In this way you are, forced to switch the cord from tool to tool before the tool can be used. In addition, you can remember to plug and unplug the power when moving from one tool to another. So my suggestions are you should use it and try to avoid it.
By Using Sharp Blades and Bits
As far we all know that a dull cutting tool is a dangerous woodworking tools. When a saw blade is not as sharp as it ideally should be, the tool and the woodworker will have to work harder to complete the project task. In these types of cases, the tool will be more likely to kick-back or bind. Moreover, a sharper cutting tool can produce a cleaner cut, so there are more than just safety advantages here. In that my opinion is, keep the blade sharp and clear of pitch and then you can have safe and also produce a very good results.
Check for Nails, Screws, and Other Metal
Every time you should check the stock you’re preparing to cut for any metal (nails, screw, staples, etc.) before beginning a cut in woodworking tools. As we all know that Nails and rapidly spinning saw blades are not a good mixer. My best suggestion is always check it before start your project, so you avoid this sort of unnecessary injury. Moreover, you should remember when you complete your daily work must pick the all screws and other metal and keep it in a safe place.
Try to Always Working Against the Cutter
Woodworking tools are designed the direction that the wood moves through the tool (or the direction that the tool moves across the wood) is in the opposite direction of the movement of the cutting head. In other words, a router bit or saw blade should cut against the motion and not with it. The cutter should cut into the stock, not with the stock. In this way you can avoid accident, so always try to working against the cutter. Besides, this you can not only avoid danger but also have lots of advantages in your internal project work. Sometimes best wood tools have lots of benefits.
Never Reach Over a Blade to Remove Cut-Offs
When you working on a best woodworking tools like a table saw, miter saw, etc.,You should remember never put your hands anywhere near the moving blade, Whenever attempting to remove waste or cut-offs from the machine.
Always wait until the blade has stopped moving and then reach for the cut-off and stopped the saw blade. You can use a piece of scrap or a push stick to move the waste away from the blade.
In addition, you should remember, Switches can be inadvertently bumped or malfunction, so just because the blade has stopped, don’t relax and put your hands too close.
Try To Avoid Distractions
For a woodworker scattering are a part of everyday life, and we all know working in the woodworking shop is so hard. When you are summoned or distracted while in the middle of performing an action with a power tool, remember to always finish the cut to a safe final verdict before dealing with it. Taking your attention away from the best woodworking tools is a secret thing for a woodworker.
In the woodworking profession has a lot of risk, when a worker dealing with the best woodworking tools like saws, router, and the best wood lathe. Following the safety rules, they can avoid an unwanted accident, however, Safety rules not only important for the worker but also for better performance. As an expert, I would like to give my opinion, which is always tried to follow the rules and regulations in your industry.